Hand Tools, Nonedged, Non-Powered: 856A1130G03, 856A1292G01, 856A2201P02
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| 856A1130G03 | 5120-01-325-3801 | Jack, Screw, hand | CFM International Inc. (58828) | ||
| 856A1133P01 | 5120-01-148-0485 | Remover, Tool | END Item Identification: KC-135, support equipment General Characteristics Item Description: Remover is rectangular steel bar with A lip on one end, all surface is coated with plastisol except for the lip | CFM International Inc. (58828) | |
| 856A1133P02 | 5120-01-141-8079 | Remover, Special Purpose | END Item Identification: B-1B support equipment General Characteristics Item Description: Square steel bar with A lip on one end, tool dimensions: 14.250 inch length, 0.625 inch thick, 0.625 inch width | General Electric Company (07482) | |
| 856A1146P02 | 5120-01-249-2317 | Inserter, Air Duct | CFM International Inc. (58828) | ||
| 856A1147G01 | 5120-01-141-7372 | Alignment Tool, Manifold | END Item Identification: F101-GE-102 engine General Characteristics Item Description: Sets proper radial position of manifold segments; forward end of block has one pin, aft has two pins | General Electric Company (07482) | |
| 856A1148G01 | 5120-01-147-7243 | Installation Tool, Bolt | CFM International Inc. (58828) | ||
| 856A1172G01 | 5120-01-134-7008 | Adapter, Torque Wrench | Style Designator: Offset Wrenching Surface Size: 0.375 inches nominal single end Drive Surface Size: 0.312 inches nominal single end | CFM International Inc. (58828) | |
| 856A1266G02 | 5120-01-217-6563 | Punch set, Aligning | Special Features: Wtool consists of 14 expandable pins of 3 sizes; the expansion is activated by A cam handle; the pins are madewith bevel spring so the pins can exert force through A range of diameters to accomodate wear in the bores of the flanges END Item Identification: KC135R acft Part Name Assigned BY Controlling Agency: Alignment pin | CFM International Inc. (58828) | |
| 856A1266G03 | 5120-01-291-6179 | Aligning Tool, Rotating Members | CFM International Inc. (58828) | ||
| 856A1292G01 | 5120-01-186-2843 | Bar, Pry | Special Features: Amaterial steel;length 9 inches;consists of two hardened steel bars;eachbar is 9 inches long and curved on A 14.540 inch radius;each bar has A two pronged claw;the other end has A 1.50 inch tang Part Name Assigned BY Controlling Agency: Pry bar tool set | General Electric Company (07482) | |
| 856A1294G01 | 5120-01-186-2758 | Socket, Socket Wrench | Material: Steel comp 4140 overall Overall Length: 1.000 inches nominal Style Designator: Internal-internal | CFM International Inc. (58828) | |
| 856A1308G01 | 5120-01-235-2584 | Puller, Mechanical | Special Features: Used to remove hpt forward outerseal from hpt disk | CFM International Inc. (58828) | |
| 856A1310P03 | 5120-01-348-6640 | Tool, Straighten | CFM International Inc. (58828) | ||
| 856A1336G01 | 5120-01-315-8283 | Wrench set, Torque | Functional Description: Used for F108 GE100 eng repair Unit Package Quantity: 2 | CFM International Inc. (58828) | |
| 856A1397G01 | 5120-01-506-8827 | Clamp, C | Special Features: Consists of three aluminum "c" clamps, with hand screw at one end of each clamp supplying clamping force, which is opposed by A nylon block mounted at the opposite end of the clamp END Item Identification: F108 engine Part Name Assigned BY Controlling Agency: Glamp set, hpt rotor | CFM International Inc. (58828) | |
| 856A1469G01 | 5120-01-472-6225 | Wrench kit | END Item Identification: C-40 CFM56-7 engine support | CFM International Inc. (58828) | |
| 856A1469G02 | 5120-01-393-5999 | Spanner Attachment set, Socket Wr | CFM International Inc. (58828) The Boeing Company (81205) | ||
| 856A2004G01 | 5120-01-178-0402 | Wrench, Flexible Shaft | End Item Identification: F101-GE-102 Functional Description: Installs and removes nuts on copressor rotor General Characteristics Item Description: Tool consists of 3 basic assemblies; outer support tube, flexible driveshaft, and a knurled knob, nominal length 32.000 inches | General Electric Company (07482) | |
| 856A2004G01 | 5120-01-285-4437 | Wrench | END Item Identification: F108 engine General Characteristics Item Description: Used to install and remove nuts after assembly while parts are hot | CFM International Inc. (58828) | |
| 856A2007P01 | 5120-01-236-5747 | Socket, Flare nut | CFM International Inc. (58828) | ||
| 856A2201P02 | 5120-01-502-4581 | Punch, Aligning | Special Features: Used with an adapter as part of removal tool, vibrator, 5130-01-164-2140, with air hammer to remove & install compressor rotor blades END Item Identification: F108 cfm 56 Part Name Assigned BY Controlling Agency: Rod, nylon | CFM International Inc. (58828) |