Hand Tools, Nonedged, Non-Powered: PWA80011, PWA80103, PWA80154
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| PWA80011 | 5120-01-257-5628 | Puller, Mechanical | Special Features: Matl steel, black oxide, 17 in. by 3.6 in. dia; U/O F117-PW-100 gearbox assy Style Designator: Slide hammer, gear and bearing three jaw external | United Technologies Corporation (77445) | |
| PWA80012 | 5120-01-257-5629 | Puller, Mechanical | Special Features: Matl steel, black oxide, 17 in. by 4.0 in. dia, used to remove integrated drive generator system oil seal retainer P/N 7P2213 from F117-PW-100 gearbox assy | United Technologies Corporation (77445) | |
| PWA800128 | 5120-01-582-3199 | Handle, Torque | END Item Identification: GSE Part Name Assigned BY Controlling Agency: Adapter, TORQUE-3 stage turbine blade twist | United Technologies Corporation (77445) | |
| PWA80013 | 5120-01-256-4406 | Puller, Mechanical | Special Features: Slide hammer, matl steel, fin black oxide; 17 in. by 3 in. dia | United Technologies Corporation (77445) | |
| PWA80014 | 5120-01-263-4528 | Puller, Mechanical | Special Features: 13.9 in. by 2.3 in. dia; matl steel, black oxide fin; E/I C-17 acft | United Technologies Corporation (77445) | |
| PWA80038 | 5120-01-244-1873 | Wrench, Plug Removal | END Item Identification: C-17 acft General Characteristics Item Description: Used with A 7/8 in. open wrench, not incl, to remove borescope plug; consists of A machined wrench assy to which A socket has been welded, A threaded rod passes thru the wrench assy and is actuated using A knurled knob; is 16.0 in. by 1.2 in. dia, matl steel, finish black oxide | United Technologies Corporation (77445) | |
| PWA80048 | 5120-01-256-4407 | Puller, Mechanical | Special Features: Matl steel, black oxide fin; 10 in. by 8.5 in. by 4 in. | United Technologies Corporation (77445) | |
| PWA80071 | 5120-01-377-3519 | Multiplier, Torque Wrench | END Item Identification: Engine assembly TF117 PW100 Functional Description: This mechanical wrench is used totorque and untorque various engine components during assembly and disassembly operations Supplementary Features: This wrench is required to torque/untorque threaded assemblies requiring high torque valves; this reduction gear unit is rated at 360, 000 inch pounnds; note: unit does not contain an anti-backlash device and must be used inconjunction with PWA80651; weight: 195LBS; dimensions: 20 inch long, 33 inchwide, 11 inch high | United Technologies Corporation (77445) | |
| PWA80096 | 5120-01-378-9618 | Adapter, Torque Wrench | END Item Identification: Engine assembly tf 117 PW100 Functional Description: This adapter is used to torque the low pressure turbine (lpt) coupling nut; it is used in conjunction with power wrenches plus an anchor plate FSC Application Data: Adapter, torque -lpt coupling nut | United Technologies Corporation (77445) | |
| PWA80096-8 PWA800968 | 5120-01-459-5512 | Tooth, Adapter, Torque | United Technologies Corporation (77445) | ||
| PWA80097 | 5120-01-378-9617 | Adapter, Torque Wrench | Material: Steel overall Special Features: This counter torque adapter is A steel cylinder having wrench teeth on one end and A machined hex on the opposite end;the tool is used with A torqueadapter and A torque multiplier; the wrench teeth engage the internal spline of the shaft; the torque multiplier engages with the hex and supplies the necessary force to torque or counter-torque the coupling nut END Item Identification: Engine assembly TF117 PW100 | United Technologies Corporation (77445) | |
| PWA80103 | 5120-01-388-7622 | Puller, Knocker | Special Features: Consists of A slide hammer to which two spring loaded jaws are attached; 17 inches long END Item Identification: F117-PW-100 Functional Description: Used to remove various oil nozzles from the gearbox and gearbox casing | United Technologies Corporation (77445) | |
| PWA80105 | 5120-01-388-4949 | Puller, Mechanical | Special Features: Used to remove the oil inlet fitting from the accessory gearbox END Item Identification: F117-PW-100 | United Technologies Corporation (77445) | |
| PWA80117 | 5120-01-388-5484 | Remover, Bearing and Bushing | Material: Steel Overall Length: 3.500 inches nominal Special Features: Aka drift | United Technologies Corporation (77445) | |
| PWA80118 | 5120-01-388-7273 | Remover, Bearing and Bushing | Material: Steel Overall Length: 3.000 inches nominal Special Features: Aka drift | United Technologies Corporation (77445) | |
| PWA80125 | 5120-01-388-5587 | Puller, Mechanical | Special Features: This puller is required to removethe deoiler impeller from the deoiler drive gearshaft FSC Application Data: Puller, jackscrew- deoiler impeller removal | United Technologies Corporation (77445) | |
| PWA80128 | 5120-01-388-8028 | Drift, Inner Race | END Item Identification: F117-PW-100 Functional Description: Used to remove the roller bearinginner race from the deoiler drive gearshaft | United Technologies Corporation (77445) | |
| PWA80129 | 5120-01-388-5535 | Adapter, Torque Wrench | Special Features: This wrench is required to remove, install, and torque the deoiler impeller retaining nut on the deoiler drive gearshaft FSC Application Data: Adapter, torque - deoiler impellerretainging nut | United Technologies Corporation (77445) | |
| PWA80148 | 5120-01-388-4939 | Inserter, Bearing and Bushing | Material: Steel Overall Length: 3.100 inches nominal Special Features: Drift | United Technologies Corporation (77445) | |
| PWA80154 | 5120-01-388-4934 | Inserter, Bearing and Bushing | Special Features: Used to install the rollar bearing on the front end of the starter drive gearshaft;overall length 4.700 inches, outside diameter 3.000 END Item Identification: F117-PW-100 | United Technologies Corporation (77445) |