Hand Tools, Nonedged, Non-Powered: TL3156, TL465U, TL582G
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| TL3156 | 5120-01-381-5321 | Puller, Mechanical | END Item Identification: Engine model J400 | Williams International Co. LLC (24235) | |
| TL322U | 5120-00-696-9338 | Wrench, Spanner | Material: Steel overall Overall Length: 1.688 inches nominal Special Features: Integral handle, 9 in. lg, 3/8 in. dia | Joint Electronics Type Designation (80058) | |
| TL323U | 5120-00-699-3335 | Wrench, Spanner | Material: Steel overall Overall Length: 1.922 inches nominal Special Features: Integral handle, 9 in. lg, 3/8 in. dia | Joint Electronics Type Designation (80058) | |
| TL353 | 5120-01-095-5594 | Trowel | Special Features: Wood handle and notches 3/16 in. deep on 3/16 in. centers Nondefinitive Spec/STD Data: 5 type and 1 class Blade Length: 10.500 inches nominal | Kraft Tool Co. (0N7U8) | |
| TL385U | 5120-00-356-4352 | Alignment Tool, Electronic Equipm | Overall Length: 6.375 inches nominal Special Features: Two screwdriver-type ends and one wrench-type end;screwdriver tip dims are 0.015 in. by 1/8 in. and 0.031 in. by 1/4 in. and the wrench-type is 1/16 in. by 1/16 in. slot Features Provided: Pocket clip and screwdriver/wrench on same end | US Army Communications (80063) | |
| TL38666E | 5120-00-473-7389 | Remover and Replace | Dresser Inc. (64104) | ||
| TL38666F | 5120-00-474-9219 | Replacing Tool, Engine Valve Seat | Special Features: Consist of replacing tool O/A length 9 inches diameter 1 inch material, steel, WD1020 C.D. Test Data Document: 19207-6283342 drawing (this is the basic governing drawing, such as A contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in A basic governing drawing) | Dresser Inc. (64104) | |
| TL4 | 5120-00-224-9197 | Claw, Tack | General Characteristics Item Description: Screwdrive handle; 13-5/8 in. O/A lg" | Great Neck Saw Mfrs Inc. (72896) | |
| TL455U | 5120-00-287-2504 | Screwdriver, Flat Tip | Overall Length: 6.250 inches nominal Blade Length: 3.203 inches nominal Blade Surface Treatment: Chromium | Joint Electronics Type Designation (80058) | |
| TL465U | 5120-00-240-5232 | Screwdriver, Offset | Overall Length: 6.000 inches nominal Style Designator: Opposite offset, opposite ends, each off set tipped TIP Type: Flat tip | Joint Electronics Type Designation (80058) | |
| TL469U | 5120-00-224-7370 | Screwdriver, Cross Tip | Overall Length: 3.000 inches nominal Blade Length: 1.000 inches nominal TIP Type: Phillips cross | Joint Electronics Type Designation (80058) | |
| TL476U | 5120-00-240-5328 | Wrench, Adjustable | Overall Length: 8.000 inches nominal Head Thickness: 0.531 inches maximum Wrenching Surface Size: 0.000 inches minimum and 0.947 inches maximum single end | US Army Communications (80063) | |
| TL4C | 5120-00-224-9197 | Claw, Tack | General Characteristics Item Description: Screwdrive handle; 13-5/8 in. O/A lg" | Great Neck Saw Mfrs Inc. (72896) | |
| TL-502-168 TL502168 | 5120-00-277-4244 | Wrench, Plier | Overall Length: 10.000 inches nominal Overall Width: 2.625 inches nominal Opening Width: 1.625 inches maximum | Allen-Vanguard LTD (K3751) | |
| TL-502-883 TL502883 | 5120-01-108-9649 | Wrench, Plier | Overall Length: 6.000 inches nominal Opening Width: 2.250 inches maximum Features Provided: Wire cutting feature | Allen-Vanguard LTD (K3751) | |
| TL510-14-32 TL5101432 | 5120-01-610-0827 | Tool, Installation a | Hydraflow (24984) | ||
| TL510-14-40 TL5101440 | 5120-01-610-0883 | Tool, Installation a | Hydraflow (24984) | ||
| TL-5515 DET-28 BD4-100 TL5515DET28BD4100 | 5120-01-363-9565 | Dresser, Abrasive Wheel, hand | General Characteristics Item Description: Single 90 deg. included point; 7/16 in. dia. X 1-1/4 in. lg | Saint-Gobain Abrasives Inc. (0TTZ4) | |
| TL563U | 5120-00-041-1471 | Adjuster, Spring, Communications E | General Characteristics Item Description: Matl-steel; finish-chrome, nickel, or black oxide; O/A lg 6.375 in.; two slotted working ends, each offset 0.250 in., slots are 0.017 in. min 0.020 in. max width and 0.156 in. deep | Joint Electronics Type Designation (80058) | |
| TL582G | 5120-00-679-2380 | Compressing Tool, Splicing Sleeve | END Item Identification: MK-356/G wire splicing kit General Characteristics Item Description: For splicing WD-1 and other telephone field wires; pliers type handles | Joint Electronics Type Designation (80058) |