Hand Tools, Power Driven: CP-0351-ESGEL, CP-0351-ESKEL, CP-20-ST

Get a Quote

 
MFG SKUNSNItem NameDetailsManufacturer (CAGE)RFQ
CP-0351-ESGEL
CP0351ESGEL
5130-00-243-1307Riveter, Yoke, PneumaticNondefinitive Spec/STD Data: 1 type and 3 class
Diameter: 0.187 inches nominal
Unit Type: Compression
Chicago Pneumatic Tool Co. (90299)

Quote

CP-0351-ESKEL
CP0351ESKEL
5130-00-138-5279Riveter, Yoke, PneumaticSpecial Features: Tandem cylinder, applied force AT90 psi shall equal or exceed 6800 lbs, max weight 23 lbs, max O/A lg 26-1/2 in., furnished W/O rivet sets
Nondefinitive Spec/STD Data: 1 type and 2 class
Diameter: 0.187 inches nominal
Chicago Pneumatic Tool Co. (90299)

Quote

CP-0351-ESKEL
CP0351ESKEL
5130-01-230-3158Riveter, Yoke, PneumaticSpecial Features: O/A LG.25-7/8 in.
Unit Type: Rivet
Cold Aluminum Alloy Rivet Diameter Accommodated: 0.188 inches nominal
Chicago Pneumatic Tool Co. (11976,90299)

Quote

CP-0351-ESREL
CP0351ESREL
5130-00-138-5281Riveter, Yoke, PneumaticSpecial Features: Tandem cylinder, applied force AT90 psi shall equal or exceed 6000 lbs, max weight 27-1/2 lbs, max O/A lg 28-1/4 in., furnished W/O rivet sets
Nondefinitive Spec/STD Data: 1 type and 2 class
Diameter: 0.187 inches nominal
Chicago Pneumatic Tool Co. (90299)

Quote

CP-0351-ESVEL
CP0351ESVEL
5130-01-113-4363Riveter, Yoke, PneumaticUnit Type: Compression
Cold Aluminum Alloy Rivet Diameter Accommodated: 0.188 inches nominal
Cold Steel Rivet Diameter Accommodated: 0.156 inches nominal
Chicago Pneumatic Tool Co. (11976,90299)

Quote

CP-0351-FUDEL
CP0351FUDEL
5130-01-287-2591Riveter, Yoke, PneumaticSpecial Features: Used to drive A wide variety of types and sizes of rivets, short stroke adjustment
Chicago Pneumatic Tool Co. (11976)

Quote

CP-0355-CEBEL
CP0355CEBEL
5130-01-148-8147Riveter, Yoke, PneumaticUnit Type: Compression
Cold Aluminum Alloy Rivet Diameter Accommodated: 0.250 inches nominal
Cold Steel Rivet Diameter Accommodated: 0.219 inches nominal
Chicago Pneumatic Tool Co. (11976)

Quote

CP-0606-TESAT
CP0606TESAT
5130-01-224-9030Wrench, Impact, PneumaticChicago Pneumatic Tool Co. (90299)

Quote

CP-0610-GALED
CP0610GALED
5130-00-184-1426Wrench, Impact, PneumaticFeatures Provided: Reversible and air volume regulator
Drive END Shape: Square
Drive Surface Size: 1.000 inches nominal
Chicago Pneumatic Tool Co. (90299)

Quote

CP-0805-ARDR
CP0805ARDR
5130-00-874-9761Power unit, Riveter, Pneumatic-HydGeneral Characteristics Item Description: Remote throttle; automatic pressure release; 7000 lb max oil pressure with 90 psi air supply; swivel union at outlet; 3/8 in. npt air inlet; 1/2 in. hose required; 14-1/2 in. L X 10-1/2 in. W X 13 in. h; includes hydraulic hose and oil
END Item Identification: Chicago pneumatic no. CP-0505 and CP-0507 pneudraulic riveters
Chicago Pneumatic Tool Co. (90299)

Quote

CP-12-15
CP1215
5130-00-901-8245Hammer, Pneumatic, PortableSpecial Features: W/carrying case
Diameter: 0.401 inches nominal
Handle Type: Pistol grip
Chicago Pneumatic Tool Co. (90299)

Quote

CP1-CED-003
CP1CED003
5130-01-589-7003Drill, E-Drill SystemGeneral Characteristics Item Description: Compact hand-held fastener cutting tool for electro discharge machining drill (5130015866558); suitable for fastener sizes from 5/32 inches to 1/4 inch; includes 10 foot utility cable
Electrobore (5G0G9)

Quote

CP1-HCT-001
CP1HCT001
5130-01-590-1184Control Terminal, E-Drill SystemGeneral Characteristics Item Description: Handheld controller and software for electro discharge machining drill (5130-01-586-6558). allows user to input fastener cutting parameters for control of the system
Electrobore (5G0G9)

Quote

CP1-HT-001
CP1HT001
5130-01-589-7003Drill, E-Drill SystemGeneral Characteristics Item Description: Compact hand-held fastener cutting tool for electro discharge machining drill (5130015866558); suitable for fastener sizes from 5/32 inches to 1/4 inch; includes 10 foot utility cable
Electrobore (5G0G9)

Quote

CP1-MSU-001
CP1MSU001
5130-01-590-0651Mobile Service Unit(msu)General Characteristics Item Description: 20 foot utility cable extension ffor electro discharge machining drill textgmobile service unit for electro discharge machining drill (5130015866558). includes power supply, power control system, power control algorithms, closed loop dielectric flushing system with deionization and two-stage filtration.
Electrobore (5G0G9)

Quote

CP1-SY-001
CP1SY001
5130-01-586-6558Edm Fastener Removal MachineGeneral Characteristics Item Description: Electro-discharge-machining fastener removal system consists of base, hand-held fastener cutting tool, adapter tip kit and electrode starter kit; system requires 15 amps of 220V, single-phase power; base measures 19 in. W. X 38 in. H. X 16 in. dp. and weighs 148 lbs, includes 20' utility cable extension; fastener cutting tool weighs 1.5 lbs and measure 7.5 in. lg. by 5 in. H. and is capable of cutting fasteners from 5/32 in. to 1/4 in.; includes 10 ft utility cable; adapter tip kit consists of two flush-head-locator inserts; one each in 1/4 in. and 3/8 in. sizes; and two magnified bomb-sight locators, one each in 1/4 in. and 3/8 in. sizes; electrode starter kit consists of ten 5/32 in. cutting electrodes, ten 3/16 in. cutting electrodes and ten 1/4 in. cutting electrodes
X & D Supply (1VTH2)

Quote

CP1-SY-002
CP1SY002
5130-01-587-7766Drill, Electro DiscGeneral Characteristics Item Description: Electro discharge machining fastener removal system; consists of base, two hand-held fastener cutting tools, adapter tip kit and electrode starter kit; system requires 15 amps of 220V, single-phase power; base measures 19 in. W X 38 in. H. X 16 in. dp. and weighs 148 lbs; includes 20 ft. utility cable extension; fastener cutting tools weigh 1.5 lbs and measure 7.5 in. lg. X 5 in. H. and are capable of cutting fasteners from 5/32 in. to 1/4 in.; each tool includes one 10 ft. utility cable; adapter tip kit consists of two flush-head-locator inserts, one each in 1/4 in. and 3/8 in. sizes; and two magnified bomb-sight locators, one each in 1/4 in. and 3/8 in. sizes; electrode starter kit consists of ten 5/32 in. cutting electrodes, ten 3/16 in. cutting electrodes and ten 1/4 in. cutting electrodes
X & D Supply (1VTH2)

Quote

CP1-SY-011
CP1SY011
5130-01-590-0651Mobile Service Unit(msu)General Characteristics Item Description: 20 foot utility cable extension ffor electro discharge machining drill textgmobile service unit for electro discharge machining drill (5130015866558). includes power supply, power control system, power control algorithms, closed loop dielectric flushing system with deionization and two-stage filtration.
Electrobore (5G0G9)

Quote

CP1-UC-001
CP1UC001
5130-01-590-1179Extension cable, E-Drill SystemGeneral Characteristics Item Description: 20 foot utility extension for electro discharge machining drill (5130015866558). allows extended range between hand tool and base
Electrobore (5G0G9)

Quote

CP1-UEC-001
CP1UEC001
5130-01-590-1179Extension cable, E-Drill SystemGeneral Characteristics Item Description: 20 foot utility extension for electro discharge machining drill (5130015866558). allows extended range between hand tool and base
Electrobore (5G0G9)

Quote

CP-20-ST
CP20ST
5130-01-322-7804Chisel, Power HammerSpecial Features: Nonsparking/nonmagnetic
Style Designator: Scaling
Material: Copper alloy
Ampco Metal Inc. (03306)
Ampco Partners LTD. (01DJ4)

Quote

  • We solve sourcing challenges for CP-0351-ESGEL, CP-0351-ESREL, CP-0351-ESVEL, CP-0355-CEBEL, CP-0606-TESAT, CP-0610-GALED, CP1-CED-003, CP1-MSU-001, CP1-SY-011, CP-20-ST - NSN parts, hard to find, long lead time and obsolete components.