Hand Tools, Power Driven: PWA38591, PWA500411, PWA50530-3
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| PWA38591 | 5130-01-235-5355 | Puller, Hydraulic | United Technologies Corporation (77445) | ||
| PWA500010 | 5130-01-482-9569 | Riveter, Yoke, Pneumatic | United Technologies Corporation (77445) | ||
| PWA500050 | 5130-01-485-8302 | Puller, Hydraulic | End Item Identification: F100-PW-100/200/220/220E/229 acft engine Functional Description: Encloses puller ring of no. 1 bearing I.D. and using hydraulic pressure and reaction against fan hub removes bearing from shaft Reference Data and Literature: Serd 8957 | United Technologies Corporation (77445) | |
| PWA500213 | 5130-01-486-7688 | Puller, Hydraulic | Special Features: Disk shaped device designed to engage the inlet guide vane sync ring and actuated by 8 mini-hydraulic CYLINDERS;28IN dia X 6.5IN high;serd 9230;PULLER-IGV sync ring and lever arms END Item Identification: F100-PW-220/220E engines | United Technologies Corporation (77445) | |
| PWA500283 | 5130-01-283-6813 | Puller, Hydraulic | Special Features: Xused to remove the first stage compressor front air seal from the first stage compressor disk; consists of jaws secured by thumb screws and A hand pump, PWA55380, actuates the puller via hydraulic cylinder; replaces PWA57347 puller END Item Identification: F100-PW-100/200/220/220E Part Name Assigned BY Controlling Agency: Puller, air seal, 1ST stg compressor | United Technologies Corporation (77445) | |
| PWA500303 | 5130-01-501-9436 | Puller, Hydraulic | United Technologies Corporation (77445) | ||
| PWA500411 | 5130-01-516-5532 | Puller, Hydraulic | Special Features: Steel construction with 4 adjustable puller jaws, used to remove the gearbox drive bevel gear from the number 3 bearing support END Item Identification: F100-PW-100/200/220/220E/229 engines Style Designator: Disk and plate | United Technologies Corporation (77445) | |
| PWA500418 | 5130-01-519-5031 | Puller, Hydraulic | Special Features: Length 11 in, width 8 in, height 8 in, made of steel with three ring-contained puller jaws END Item Identification: F100-PW-100/200/220/220E/229 Part Name Assigned BY Controlling Agency: Puller, removal-no 3 bearing, split-inner race | United Technologies Corporation (77445) | |
| PWA500420 | 5130-01-519-5035 | Puller, Hydraulic | Special Features: Length 8 in, width 7 in, height 7 in, hardened steel design with circumferential puller legs END Item Identification: F100-PW-100/200/220/220E/229 Part Name Assigned BY Controlling Agency: Puller, hydraulic-no 2 bearing split inner race | United Technologies Corporation (77445) | |
| PWA50308 | 5130-00-468-0849 | Wrench, Torque, Hydraulic | Accessory Components and Quantity: 220VAC, 3 phase, 60 cycle electric pump 10000 psi capacity; frame; 12 foot high pressure hose; 12 foot low pressure hose General Characteristics Item Description: Ratchet type, 2.937 in. by 11.625 in. by 12.625 in. O/a dim., 43 toothspline, 10000 foot pound rating | United Technologies Corporation (77445) | |
| PWA50308-9 PWA503089 | 5130-01-065-7726 | Lug, Hydraulic Wrench | END Item Identification: 5130010607368 | United Technologies Corporation (77445) | |
| PWA50308N | 5130-00-468-0849 | Wrench, Torque, Hydraulic | Accessory Components and Quantity: 220VAC, 3 phase, 60 cycle electric pump 10000 psi capacity; frame; 12 foot high pressure hose; 12 foot low pressure hose General Characteristics Item Description: Ratchet type, 2.937 in. by 11.625 in. by 12.625 in. O/a dim., 43 toothspline, 10000 foot pound rating | United Technologies Corporation (77445) | |
| PWA50311 | 5130-00-488-8722 | Adapter, Hydraulic Puller | General Characteristics Item Description: Steel, 3.750 in. dia by 2.125 in. H O/A dim., use with P/N PWA22726 | United Technologies Corporation (77445) | |
| PWA50311-12 PWA5031112 | 5130-01-060-0556 | Dowel rod, Puller | General Characteristics Item Description: Matl steel, 3.25 in. L, 0.25 in. dia END Item Identification: 5130004888722 | United Technologies Corporation (77445) | |
| PWA50311A | 5130-00-488-8722 | Adapter, Hydraulic Puller | General Characteristics Item Description: Steel, 3.750 in. dia by 2.125 in. H O/A dim., use with P/N PWA22726 | United Technologies Corporation (77445) | |
| PWA50530 | 5130-00-488-8810 | Puller, Hydraulic | Special Features: Tubular construction with collet type expanding jaws; 3 in. dia X 36 in. lg; use with PWA50317 | United Technologies Corporation (77445) | |
| PWA50530-11 PWA5053011 | 5130-01-058-7300 | Shaft Assembly, Hydraulic Puller | General Characteristics Item Description: Item consists of three parts 2 ofwhich are steel aisi 4140 or 4150 and the third alloy tubing A1S1 4142, blackoxide finish, 15.375 in. O/A lg. | Kell-Strom Tool International Inc. (75245) Point Machine Company (9N716) Skill-Metric Machine and Tool Inc. (66769) United Technologies Corporation (52661,77445) | |
| PWA50530-12 PWA5053012 | 5130-00-374-2453 | Collet, Puller | General Characteristics Item Description: Steel, 3.437 in. dia, 8.000 in. lg | United Technologies Corporation (77445) | |
| PWA50530-13 PWA5053013 | 5130-01-058-6167 | Rod Assembly, Hydraulic Puller | General Characteristics Item Description: 2.485 in. dia, 13.500 in. O/A L | United Technologies Corporation (77445) | |
| PWA50530-3 PWA505303 | 5130-00-374-2453 | Collet, Puller | General Characteristics Item Description: Steel, 3.437 in. dia, 8.000 in. lg | United Technologies Corporation (77445) |