Hand Tools, Power Driven: PWA70971, PWA81148, PWA81793
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| PWA70971 | 5130-01-381-3588 | Riveter, Yoke, Pneumatic | END Item Identification: F100-220 Unit Type: Rivet Functional Description: Used to install bumper rivets without removing ring from core, works ON4TH and 5TH stage sync rings | United Technologies Corporation (77445) | |
| PWA71273 | 5130-01-433-8345 | Angle Attachment, Riveter | END Item Identification: F100-PW-229 Part Name Assigned BY Controlling Agency: Adapter, flaring, serd 7458 | United Technologies Corporation (77445) | |
| PWA71772 | 5130-01-450-2762 | Angle Attachment, Riveter | END Item Identification: F100-PW-100/200/220/220E Part Name Assigned BY Controlling Agency: Expander, rivet Functional Description: Upset the tubular rivet securing it to the case | United Technologies Corporation (77445) | |
| PWA72632 | 5130-01-487-5634 | Rivet set, Pneumatic Tool | Special Features: Altered from chicago pneumatic item SM210 or SM211 rivet set;anvil head outer dia reduced from .500 to .250 in to provide clearance for the anvil to fully contact the rivet head from within the inner dia at the rear turbine case flange Overall Length: 0.780 inches nominal END Item Identification: F100 engine | United Technologies Corporation (77445) | |
| PWA7320 | 5130-00-095-3250 | Plate | United Technologies Corporation (77445) | ||
| PWA76855 | 5130-01-407-2831 | Hydraulic Bender Pump | Special Features: B consists of A base with 6 feet, hand actuated hydraulic pump, manifold block, relief valve set at 750 psi, dial gage, four-way valve, two lifting handles, and fixed and flexible hydraulic lines END Item Identification: F117-PW-100 Functional Description: Used to operate PWA82001 hydraulic bender to remove/install counterweights from the 7TH stage blades of the low pressure turbine during trim balance operations | United Technologies Corporation (77445) | |
| PWA80064 | 5130-01-387-7286 | Puller, Hydraulic | Special Features: Consists of A welded steel support ring base plate, clamps and jaws, and A hydraulic cylinder END Item Identification: F117-PW-100 Functional Description: Used to remove the third thru seventh stage air seals and third stage support | United Technologies Corporation (77445) | |
| PWA80207 | 5130-01-388-5514 | Puller, Hydraulic | Special Features: This hydraulic puller is requiredto remove the roller bearing inner race from the input shaft of the angle gearbox FSC Application Data: Puller, hydraulic ang gearbox, rlrbrg inr race | United Technologies Corporation (77445) | |
| PWA80387 | 5130-01-388-5422 | Puller, Hydraulic | Special Features: 26 in. lg, 8.5 in. od END Item Identification: F117-PW-100 Unit Type: Remote control | United Technologies Corporation (77445) | |
| PWA80388 | 5130-01-388-4908 | Puller, Hydraulic | Special Features: Used to remove the rollar bearinginner race from the bevel gear end of the input gearshaft END Item Identification: F117-PW-100 | United Technologies Corporation (77445) | |
| PWA80389 | 5130-01-388-4915 | Puller, Hydraulic | Special Features: Required to remove the ball bearing inner race halves, form the bevel gear end of the input gearshaft END Item Identification: F117-PW-100 | United Technologies Corporation (77445) | |
| PWA80607 | 5130-01-378-9616 | Puller, Hydraulic | END Item Identification: Engine assembly TF117 PW100 Functional Description: This tool is required to assembleand disassemble the low pressure turbine and the turbine exhaust case group;used for maintenance on the F117-PW-100 Supplementary Features: This pusher/puller consists of A steel flanged cylindrical housing, retainers, two pullers, one spacer, one hydraulic cylinder, and supporting hardware; the push/pull force is facilitated by the use of A hydraulic cylinder;dimensions: 11 in. long, 11 in. wide, 16 in. high; weight: 73.0 lbs | United Technologies Corporation (77445) | |
| PWA80948 | 5130-01-385-4043 | Puller, Hydraulic | END Item Identification: F117-PW100 Functional Description: This puller, hydraulic consists 0F A plate, pusher, hydraulic cylinder, post, washer, and A nut. the shaft passes thru the pusher and hydraulic cylinder. the nut fastens the shaft to the cylinder. A hydraulic hand pump activates the hydraulic cylinder to facilitate the seperation | United Technologies Corporation (77445) | |
| PWA8095 | 5130-00-566-3462 | Puller, Hydraulic | United Technologies Corporation (77445) | ||
| PWA81148 | 5130-01-379-8884 | Puller, Hydraulic | Special Features: The number one bearing fits snugly onto the low pressure compressor drive shaft and must be removed during engine disassembly; the use of significant mechanical force is required to safely remove the bearing from the shaft END Item Identification: Engine assembly TF117 PW100 Functional Description: Puller, PWA81148, is A machined steel assembly comprised of four subassemblies: A clam shell type jaw assembly, A support ring with thumb screws, acentering/counter force plate, A support puller spider plate with four puller rods, and A hydraulic cylinder; the jaw assembly is clamped around the lowcompressor drive shaft below the number one bearing | United Technologies Corporation (77445) | |
| PWA81433 | 5130-01-385-2790 | Crimper | Special Features: PWA81433 crimper consists of A plate, A guide block, two jaws, A fork handle, A threaded rod and hex nut; thetwo jaws can be mounted in two positions on the plate and guide block; the outer angled position is for prebend and the inner vertical position is for the final bend Functional Description: The 10TH stage high pressure com pressor blade locks require A prebend and final bend after installation FSC Application Data: Pusher/puller bearing and bushingplus crimper, bending-hpc 10TH stage blade lock | United Technologies Corporation (77445) | |
| PWA81544 | 5130-01-394-0253 | Yoke, Riveter, Pneuma | Special Features: Consists of A yoke having A swingjaw with an anvil and A seperate plunger END Item Identification: F117-PW-100 Functional Description: Used to install the bore scope boss onto the low turbine case | United Technologies Corporation (77445) | |
| PWA81627 | 5130-01-386-2860 | Puller, Hydraulic | END Item Identification: Used on but not limited to F117-PW-100 Functional Description: Puller consists of A steel ring, A split ring, 2 set screws and 2 hand knobs | United Technologies Corporation (77445) | |
| PWA81770 | 5130-01-377-4618 | Puller, Hydraulic | Functional Description: This puller removes the no. five bearing plug from the low pressure compressor drive shaft; used for maintenance on the F117-PW-100 Supplementary Features: This puller is A machined steel assembly comprised of three subassemblies: an expanding collet puller jaw, A puller rod assembly, and A pusher tubeand hydraulic cylinder; the puller jaws attach to the no. five bearing plug and the remaining subassemblies are assembled to the jaws; A hydraulic hand pump is used to actuate the cylinder; dimensions: 16 in. long, 5 in. wide, 5IN high; weight: 20.0 lbs FSC Application Data: Puller, hydraulic -no.five bearingplug | United Technologies Corporation (77445) | |
| PWA81793 | 5130-01-386-8829 | Puller, Hydraulic | Special Features: Puller has cylindrical steel frame, steel ram extension, 6 steel pullerlegs, 6 hand knobs END Item Identification: Used on but not limited to F117-PW-100 Functional Description: Used to remove 2ND turbine disk from 1ST turbine disk | United Technologies Corporation (77445) |