Hand Tools, Power Driven: T12618457, T18117, T71155
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| T12618457 | 5130-01-386-8217 | Honing unit, Cylindrical Bore, Por | Fairbanks Morse Engine (82796) | ||
| T15-41 T1541 | 5130-01-408-5293 | Handle, Powered Tool | Ingersoll-Rand Co. (65853) | ||
| T170-1/4 T17014 | 5130-00-672-8671 | Bit, Screwdriver | Overall Length: 1.250 inches nominal Shank Width Across Wrench Flats: 0.438 inches nominal TIP Type: Torque set cross | Omega Technologies Inc. (9X250) | |
| T18117 | 5130-00-223-4341 | Pliers, Knock Over | TRW Inc. (13799) | ||
| T1815 | 5130-01-282-9117 | Chisel, Power Hammer | Special Features: 3/4 in. hex X 21/32 in. round shank END Item Identification: Bosch model 11202, 11203, 11205 and 11209 rotary hammers Style Designator: WIDE | Bosch Robert Corp. (53867) | |
| T20/3.3/D10MM T2033D10MM | 5130-01-452-2506 | Rivet set, Pneumatic Tool | Taumel Noiseless Riveters (54604) | ||
| T21 | 5130-01-421-0691 | Rivet set, Blank, Pneumatic Tool | END Item Identification: Riveting machine, brakes, F-16 aircraft | Taumel Noiseless Riveters (54604) | |
| T-22 T22 | 5130-01-038-1156 | Wheel, Abrasive | Special Features: Cartridge roll, sidewall type Wheel Diameter: 1.500 inches nominal Abrasive Material: GLUE | Merit Abrasive Products Inc. (00179) | |
| T-23 T23 | 5130-01-038-1155 | Wheel, Abrasive | Special Features: Cartridge roll, sidewall type Wheel Diameter: 1.500 inches nominal Abrasive Material: GLUE | Merit Abrasive Products Inc. (00179) | |
| T-23 T23 | 5130-01-394-6539 | Angle Attachment, Drill Chuck | Overall Length: 6.500 inches nominal General Characteristics Item Description: Thin head offset drilling attachm ent; drill capacity 1/4 inch maximum | Terry George A Co. (91101) | |
| T24B27 | 5130-00-511-0210 | Bit, Screwdriver | Overall Length: 1.250 inches nominal Shank Width Across Wrench Flats: 0.438 inches nominal TIP Type: Torque set cross | Snap-on Incorporated (00784) | |
| T-25-1/4-28 T251428 | 5130-01-394-6540 | Angle Attachment, Drill Chuck | Overall Length: 3.188 inches nominal General Characteristics Item Description: Flat offset drilling attachment with 1/4 inch - 28 threaded spindle | Terry George A Co. (91101) | |
| T27363 | 5130-00-845-6849 | Rivet set, Pneumatic Tool | Overall Length: 2.063 inches nominal Shank Style: Round Unit Type: Cupped | Kell-Strom Tool International Inc. (75245) | |
| T3SS | 5130-01-579-4123 | Driver, Projectile unit | Special Features: Power: 100 joules; capable of fastening loads into: concrete, hollow block, pan deck, and steel; fastener/pin diameter: 0.125; single pin fasteners preassembled, W/ popular clips for convenience; fastener assembly: fasteners are preassembled, ready to shoot Overall Length: 13.500 inches nominal Part Name Assigned BY Controlling Agency: T3SS gas technology tool | Illinois Tool Works Inc. (30323) | |
| T423648 | 5130-00-483-3547 | Cutting Tool, Goveno | Goodrich Control Systems Limited (K0131) | ||
| T4B2 | 5130-00-798-0828 | Bit, Screwdriver | Overall Length: 1.250 inches nominal Shank Width Across Wrench Flats: 0.250 inches nominal TIP Type: Torque set cross | Snap-on Incorporated (00784) | |
| T-595 T595 | 5130-01-290-3065 | Cable Preparation m | Seven Associates (17184) | ||
| T634041 | 5130-00-482-5685 | Wheel, Abrasive | END Item Identification: Partner model K12 rescue saw kit Maximum Speed Rating IN RPM: 6000.0 Wheel Diameter: 12.000 inches nominal | Team Equipment Inc. (1HM07) | |
| T7 | 5130-00-608-2011 | Wheel, Abrasive | Merit Abrasive Products Inc. (00179) | ||
| T71155 | 5130-00-048-3030 | Punch, Tube Belling, Power Hammer | Tube Outside Diameter FOR Which Designed: 0.270 inches minimum and 0.271 inches maximum | Alliedsignal Inc. (72599) Honeywell International Inc. (70210) |